Model Marine Supplies - 01803 400 827


Our products


Home » ENGINE MOUNTS & Bobbins

 Checkout

OCTURA HUMMDINGER ENGINE MOUNTS

Details 

These mounts are made from extruded aluminum section as shown in the diagrams. The engine sits in its own cradle which may have to be opened up to take the crankcase and then drilled and tapped for the mounting bolts. Several mounts are available for PICCO & K & B engines already machined and tapped. Mounts are available to fit between 4 & 5" rails. Inserts only are also available."
Price: Please call
Add to cart

 
OCTURA HUMM DINGER mounts IV-45.3.5
 
OCTURA hummdinger 4" wide engine mount with deep cradle, fits engines 3.5cc to between 4" stringers.

Special order only from manufacturer."
Price: £45.95
Add to cart

OCTURA HUMM DINGER mount V-65 INSERT

Details 

Octura V-65 engine mount insert cradle only
Price: £12.95
Add to cart

OCTURA HUMM DINGER mounts V-90

Details 

The OCTURA V-90 mount is a well made and sturdy mount which gives excellent support for your 11 to 15cc engines crankcase. Your engine sits in a cradle which is then supported with side bearers and their noise suppression rubbers. The mount is made to fit between 5 bearers.
Engine pads need to be adjusted, drilled and tapped for engine being used. Picture shows both V90 & V65 units
The V-65 has now been discontinued by OCTURA
Price: £49.95
Out of Stock

 
AEROMARINE OPS 21 Engine mount
 
Aeromarine OPS 21 Engine mount
Price: £54.95
Add to cart

 
AEROMARINE CMB45Rs ENGINE MOUNT 4"
 
AEROMARINE CMB45Rs Engine mount for 4" bearers
Price: £54.95
Add to cart

AEROMARINE CMB 45RS Engine Mounts 5"

Details 

Aeromarine engine mount pre drilled for CMB 45RS motor to fit between 5" stringers
Price: £54.95
Add to cart

AEROMARINE CMB 67 ENGINE MOUNTS

Details 

Aeromarine Engine Mount These Quiet Mounts from Aeromarine come pre-drilled to fit most engines and to fit between 5in. or 4in. bearers. The mount shown is the CMB 67-80 mount. Please state your engine when ordering as each mount is calibrated for its specific engine.

CMB 21
CMB 45
CMB 45RS
CMB 67-80
CMB 90-101
OPS 21
OPS 45
S 6OP7-80
OPS 90
OS 45
OS 67
OS 90
PICCO 21
PICCO 45
PICCO 67
PICCO 90
Price: £54.95
Out of Stock

AEROMARINE K&B 67 Engine Mounts 5"

Details 

Aeromarine K&B 67 engine mount for 5" stringers
Price: £54.95
Add to cart

 
AEROMARINE CMB 90/91 Engine mount
 
Aeromarine engine mount pre drilled for the CMB910/101 engine with 6 rubbers to fit between 5" bearers
Price: £54.95
Out of Stock

SPDUM-001-S  Universal STD. Mount

Details 

SPDUM-001-S Universal STD. Mount The Speedmaster enginge mount is fully adjustable for engines from 6.5cc up to 15cc. It comes with sets of different thickness spacers to enable all engines to fit between 4" or 5" stringers.
Price: £54.95
Out of Stock

SPEEDMASTER Universal  40/90 offset Engine Mount

Details 

SPDUM-002-O 7.5cc to 15cc Universal Offset Mount for monos where you need to get the engine as low as possible.
Price: £54.95
Add to cart

ENGINE MOUNT Bobbins for OCTURA & AEROMARINE mounts

Details 

Engine mount rubbers 5/8" x 5/8" for Octura & Aeromarine mounts with 1/4"-20 threads male & female ends

£3.25 each"
Price: £3.25
Add to cart

ENGINE Mount Bobbin (Large, USA) 25 x 18mm

Details 

Heavy duty male/female bobbin 1" x 3/4" as used in the BHHAnson mount and many of the American engine mounts with unc. threads.  A very strong bobbin ideal for petrol engine mounts. Complete with stainless steel nut, washers and bolt."
Price: £3.95
Add to cart

 
Engine mount bobbin (15 x 15mm) male/female 4mm stud
 
Rubber bobbin 15mm x 15mm male/female with 4mm stud and cap bolt complete with stainless steel nut and washers
Price: £2.25
Add to cart

Engine mount bobbin (15 x 15mm) male/male 5mm stud

Details 

Small engine mount bobbins 15mm x 15mm with 5mm studs, complete with s/s nuts and washers.
Price: £2.25
Out of Stock

Engine mount bobbin (20 x 15mm) male/female 6mm

Details 

Large engine mount rubber bobbins 20mm x 15mm with 6mm male and female ends. comes with S/steel nut, bolt & washers.
Price: £2.35
Add to cart

Engine Mount Bobbin 20 x 15mm male/male 6mm stud

Details 

Large engine mount bobbins also used in rubber couplings. 20mm x 15mm, with 6mm studs and s/s nuts & lock washers.
Price: £2.25
Add to cart

Engine mount bobbin (20 x 15mm) male/female 5mm

Details 

Discontinued 20mm x 15mm Engine mount rubber bobbins with 5mm male and female ends, complete with s/s nut, washers and bolt.
Price: £2.25
Out of Stock




 

Home
Products
Categories
Search
Contact Us

 Login Status

Not logged in

» Login

Search

Shopping cart
0 Product(s) in cart
Total £0.00
» Checkout

Home | Products | Categories | Search | Shopping Cart | Contact Us
Copyright ©2012 - Hosted by UK Prime.