Our products

 W/c  Electric motor mount for 4074 and 4082mm motors.

The Rocket 4082 water cooled brushless inrunner motor has a 1900Kv rating.
Measuring 40mm dia. x 82mm long with 25mm front plate mounting holes and a 5mm shaft. use with 150-200amp.ESC

 Measuring 40mm dia. x 92mm long with 25mm front plate mounting holes and a 5mm shaft. use with 150-200amp.ESC
Rocket 4092

SSS5694 Brushless motor 1000kv
Max. volts 50v
Revs. 38000
Shaft.  8mm

 8mm gold female soldering connector for  high amp.  ESC's 200/300amp, and for the 56mm motors

High quality 4mm stainless steel shaft threaded both ends in a 6mm od. brass tube with  bronze bushes

High quality 4mm stainless steel shaft threaded both ends in a 6 or 8mm od. brass tube with bronze bushes

High quality 4mm stainless steel shaft threaded both ends in a 8mm od. brass tube with leaded bronze bushes

High quality 4mm stainless steel shaft threaded both ends in a 8mm od. brass tube with leaded bronze bushes

High quality 4mm stainless steel shaft threaded both ends in a 6mm od. brassl tube with bronze bushes

9" x 4mm stainless steel shaft threaded both ends in a 6mm od.. brass tube with  bronze bushes

High quality 4mm stainless steel shaft threaded both ends in a 6mm od.. brass tube with  bronze bushes

10" x 4mm High quality 4mm stainless steel shaft threaded both ends in a 6mm od. brass tube with  bronze bushes

High quality 4mm stainless steel shaft threaded both ends in a 6mm od.. brass tube with  bronze bushes

 High quality 4mm stainless steel shaft threaded one end in a 8mm od. brass tube with  bronze bushes

High quality 4mm stainless steel shaft threaded both ends in a 6mm od. brass tube with  bronze bushes

High quality 4mm stainless steel shaft threaded both ends in a 8mm od. brass tube with  bronze bushes

High quality 4mm stainless steel shaft threaded both ends in a 8mm od. stainless tube with  bronze bushes

High quality 4mm stainless steel shaft threaded both ends in a 8mm od. brass tube with  bronze bushes

High quality 4mm stainless steel shaft threaded both ends in a 8mm od. brass tube with leaded bronze bushes with centre bearing to prevent whipping

High quality 4mm stainless steel shaft threaded both ends in a 8mm od. brass tube with  bronze bushes and a centre bearing to prevent whipping.

High quality 16" x 4mm stainless steel shaft and brass prop tube threaded both ends bronze bushes and a centre bearing to prevent whipping.

High quality 4mm stainless steel shaft threaded both ends in a 8mm od. brass tube with leaded bronze bushes and a centre bearing to prevent whipping.

High quality 18" x 4mm stainless steel shaft and prop tube threaded both ends bronze bushes and a centre bearing to prevent whipping.

Used Webra 61 flywheel

Sullivans Dynatron Hi Torque 12/24volt starter motor. Will start most engines using only 12v supply. For the more difficult ones then connect to 24v as a last resort.
Available to order only

Skeg to support 3/8" shaft prop tube

Aeromarine aluminum tail nut with lock nut for 1/4-28unf. threaded flexi shafts. 

Speedmaster Electic motor  coupling 6mm to 1/4"

 AEROMARINE Electic motor  coupling 6mm to 3/16"